COMANCO recently installed 30 mil HDPE textured geomembrane for a 5-acre storage pond at a recreation facility near central Florida. The project team was led by foreman Maximino Macedo and was completed on schedule and with zero incidents! Another great …
COMANCO recently completed a stormwater collection improvements and rain cap maintenance project in Florida. The duration of the project lasted 3 months and finished with zero safety incidents. Work completed consisted of inspecting and repairing damage to the existing liner over two landfill capped …
COMANCO recently completed the installation of 4,000sf of Filter-Point Fabriform on a project near central Florida. The fabriform was installed in conjunction with a larger contract in performing regular maintenance on the HDPE geomembrane. The crew performed the installation on …
COMANCO has been working steadily on the new entrance road at a landfill in central Florida. The project started back in June and is getting closer to completion as each month passes. Recently, the soil surcharge that COMANCO was contracted to place has …
Vacuum Box Testing of Destructive Test Location repair. From the desk of: Robert Lung Quality Control Supervisor
COMANCO Environmental has recently begun deployment of a gyp stack expansion project in Southeast Idaho. The project includes the installation of 182,000 SF of 60mil single-sided HDPE geomembrane, 68,000 SF of 60mil double-sided HDPE geomembrane, and 32,000 SF geocomposite vent …
A COMANCO crew began working on cleaning a ditch liner near a truck unloading pad at a chemical plant in Central Florida this past week. The crew will remove the liner in the ditch after the sediment is removed and …
COMANCO is currently working to install 6″ filter point fabriform flumes down the side of a closed landfill cell near Orlando, FL. The two main flumes each measure over 400 LF in length, and vary between 16′ and 45′ in …
Last week, COMANCO Environmental commenced on a 4-acre Dairy Farm Pond project in Bell, Florida. Supervisor, Kenny Frazier and crew started with stripping the existing surface to remove any organic materials then began a mass excavation operation to start digging …
In destructive testing, tests are carried out to the specimen’s failure, in order to understand a specimen’s structural performance or material behavior under different loads. Liner installation requires a destructive test sample generally every 500 feet of a welded seam. It …
